How long does it take to fill a 12 foot pool?
5 min read
Asked by: Erika Cordova
How much water does it take to fill a 12 foot round pool?
2,975 gals
| Above Ground Swimming Pool Water Volumes by Size | ||
|---|---|---|
| 12 ft Round | 2,975 gals | 3,398 gals |
| 15 ft Round | 4,646 gals | 5,310 gals |
| 18 ft Round | 7,646 gals | 8,602 gals |
| 21 ft Round | 9,106 gals | 10,408 gals |
How long does it take to fill a 10 foot pool?
For the smallest Intex Easy Set, that’s 10 feet in diameter and has a depth of 30 inches, it will take about 1.5 hours for it to be filled up to 80% of its capacity using a hose with a 12 GPM flow rate.
Can you fill a pool overnight?
Although it may take several hours to fill your pool completely, make sure that someone is available to continuously checking on the pool. It is never recommended to leave your home during this time or to fill your pool overnight.
How long does it take to fill a 15 foot pool?
It would take 31.25 hours to fill a 15,000 gallon swimming pool if your water pressure is 8 gallons per minute and your outside water hose is 480 gallons per hour.
How many gallons is a 12×12 pool?
Above Ground Pools with a Depth of 48″ (4′)
| SIZE | GALLONS OF WATER |
|---|---|
| 12′ Round | 3,398 |
| 15′ Round | 5,310 |
| 18′ Round | 7,646 |
| 21′ Round | 10,407 |
How soon after filling a pool Can you swim?
Chlorine/non-chlorine chemicals – When adding chlorine or non-chlorine chemicals to “shock” your pool after a fill-up, wait about 24 hours or until levels are approximately 5 ppm. If you’ll only be adding liquid chlorine, it’s generally safe to swim after about 4 hours or until levels are 5 ppm or lower.
How long does it take to fill a 15 foot Intex pool?
Answer : Between 2 and 6 hours, depending on the size of the pool.
How long does it take for a 16 ft pool to fill up?
The average pool can take 12-24 hours to fill and that is only if you have a few hoses chugging away. When your family is chomping at the bit to dive in, that may as well be an eternity. Forget this plan if you are using well water, you will burn up your pump or leave your home without water for days.
Is it cheaper to fill a pool with a hose?
It fills up the pool quicker and costs the same amount if using your hose. When you use your hose you have to pay sewer fees. The water truck gets water at a discounted price, however you have to pay for delivery.
What is the fastest way to fill a pool?
What Is The Fastest Way To Fill A Big Pool? The fastest way to fill a big pool is by using a water delivery service, or a city fire hydrant. Note that using city fire hydrants to fill your swimming pool requires special permission from your local fire department, and rules differ from state to state.
Can you use a fire hydrant to fill a pool?
With the warmer weather recently, some people were thinking of filling up their pool. However, if you are filling a pool, you shouldn’t use a fire hydrant. While using a hydrant may be quicker, it can be very dangerous.
What’s the cheapest way to fill up a pool?
The cheapest way to fill a pool is with your hose.
Will 2 hoses fill a pool faster than 1?
Splitting that into two lines will not likely double the flow rate as there is a pressure drop, but it should increase the total flow rate considerably.
What to put in pool after filling it?
Chemicals Needed for Pool Start Ups
- Stain & Scale Preventer.
- Granular Shock Chlorine.
- Chlorine Tablets.
- pH Increaser and/or pH Decreaser.
- Alkalinity and/or Calcium Increaser.
- Cyanuric Acid (Stabilizer)
- Algaecide and Clarifiers if needed.
- Complete Test Kit or Test Strips.
Can you fill a pool with hose water?
You can fill your pool with a hose from the tap, just like you would with city water. But remember that you’ll be moving many thousands of gallons of water through your softener system, so be sure to factor in the cost of salt and the electricity required to pump the water to your pool.
How much does it cost to fill a pool?
The average cost to fill in an inground pool is $4,000 to $16,000 for full demolition or $2,000 to $10,000 to fill in with dirt. An above ground pool removal costs $300 to $800, or $2,500 with a deck. The cost to get rid of a swimming pool depends on the size, depth, material, and accessibility.
How do I fill my pool without an outside tap?
Kids want to go to the pad one pill don't have a garden table no problem all you need is a standard garden hose and something heavy to weigh it down. So when the garden hose is in the same.
How do you calculate how long it takes to fill a pool?
Another inch per hour. So on average it takes 24 to 48 hours to fill swimming pool in general using a regular garden hose size fill source if.
How do I fill my above ground pool?
But you would just hang it over the side of the pool water will pump through it you'll see it come through that filter. Nice clean pure water going into that pool.
How long does it take to fill a 10000 gal pool?
25 hours
It would take 25 hours to fill 10,000 gallons.
How long does it take to fill a gallon of water?
The formula to find GPM is 60 divided by the seconds it takes to fill a one gallon container (60 / seconds = GPM). Example: The one gallon container fills in 5 seconds. 60 / 5 = 12 GPM. (60 divided by 5 equals 12 gallons per minute.)
How long does it take to fill a 13000 gallon pool?
about 24 hours
If you’ve got a 13,000 gallon pool, it would take about 24 hours to fill your pool.
