How high should pool water be on skimmer?

Asked by: Barbara Phillips

The level at which pool skimmers function properly is between one third and about half way up the opening of the pool skimmer. If the water level is too high the debris floating next to the opening may pass by without being pulled into the skimmer.

How high should the pool water be above the skimmer?

between one-third and one-half

It is recommended you have your water level between one-third and one-half up the swimming pool skimmer box opening. If the level is higher than that, it may slow or even stop debris from being pulled into the skimmer box through the plate or valve.

Can the water be over the skimmer in a pool?

Your pool skimmer will help filter out some debris and insects that enter your pool, but only if the water level isn’t above the skimmer opening. If the skimmer is completely covered by water, then it won’t work properly.

How high should the water be for my pool filter?

For effective filter action, the water level should be at the midpoint of the skimmer. Too low, and water cannot flow into the filter system at all; too high and the flow will be less efficient.

What happens if pool water level is below skimmer?

If the water in your swimming pool is too low, the skimmer can bottom out and suck air into your filter system. And when that happens, you’re at risk for burning out the motor on your pool pump. This could be a costly problem, which is why you should definitely keep an eye on the water level of your swimming pool.

Where should water line be on skimmer?

You can see that the water level is actually over the skimmer should be halfway. Which means that inside the skimmer itself is not going to be doing any kind of surface debris cleaning.

What if pool water is too high?

If the water level is too high the debris floating next to the opening may pass by without being pulled into the skimmer. However if the water level is too low it may cause the skimmer to suck air into the system. If this happens you may run the risk of burning up your pool pumps motor.

What is the right pool water level?

Pool owners often wonder what the optimal water level is for their pool. The pool water level is best measured at the skimmer assembly. The water level should be about one-third of the distance below the top of the skimmer.

Do I need to lower the water level in my pool?

Body as well as this as as the skimmer plumbing lines. So that's the main reason that you have to lower the water level is you must lower it below the skimmer.

Can you run pool pump if water is below skimmer?

You can partially use the pool pump to drain the pool below the skimmer. You can also choose to use a submersible pump on your above ground pool or if your inground pool doesn’t have a main drain. Open the main drain valve and close the valve from the skimmer.

How do I lower the water level below my skimmer?

If your main drain is connected to the skimmer, and you have two holes in the bottom of the skimmer – then it is more difficult to pump below the skimmer. The easiest method is to connect a threaded hose adapter into the hole which goes to the pump, and connect a primed, “tight” vacuum hose to it.

How do you know if your pool water is too low?

If your water level is too low, your skimmer will suck in water as usual, but it will also suck in air. And in case you don’t already know, your pool system was designed to move water only—never, ever air.

How do I get more suction on my skimmer?

The first thing to do to increase the suction is to check for blockage and air leaks. If one of the skimmers does not suck, it would be necessary to remove the basket from the skimmer. Then check if there isn’t a flow control valve at the bottom of the skimmer, which would be almost closed.

How often do you add water to your pool?

How often should I have to fill my pool? This will vary depending upon several factors including: weather, if the pool is covered or not, bather load, and if it is heated or not. With pools that are covered, a good rule of thumb is that they should not have to be refilled more often than once every 2 weeks.

Is it bad for a pool to be too full?

You don’t need to drain your pool, as there is no risk to your pool by it being full. The only thing you lose with a pool filled to the rim is your skimmer’s surface cleaning action. Overall, it still draws water and the equipment is just fine.

Should I turn off pool pump when raining?

If your pool pump manufacturer has declared your pump is rain safe, you can leave it on in rainfall. Nevertheless, during a thunderstorm, it is highly recommended that you switch off and unplug your pool pump to prevent any costly and irreversible damages to your pool equipment.

How long should you run your pool pump every day?

approximately 8 hours a day

Every pool must turn over at least once a day, so most pool pumps should run approximately 8 hours a day. But here’s the thing: you don’t have to run your pool pump consecutively. You can choose to run it for three hours in the morning before you leave for work and another 5 hours in the evening.