How high do you hang a coat rack?

Asked by: Sarah Wager

According to the experts at Home Décor Bliss, the average height of a coat rack is about 5 feet; this height keeps even long coats from hanging on the ground, but is reachable to most individuals.

How high off the ground should a coat rack be?

Coat racks are installed at about five feet high. This ensures that they are convenient and easy to reach for everyone but still high enough to keep coats from dragging on the floor. For proper and safe installation, always screw wall-mounted coat racks into studs (or at least use drywall anchors for extra support).

What is the proper height to hang a coat hook?

The non-accessible standard height of a coat hook is usually based on the average adult human size. Based on standard human dimensions of shoulder to eye height coat hooks should be placed at 60″ (1520 mm) to 66″ (1680 mm). A standard height coat hook is not required or specified by the accessibility standards.

How high should a coat rack be above a bench?

For children 4 feet adults Aprox 5 feet off the floor is a average leaving roughly 3 feet above the bench for jackets to hang down. Longer coats would need to be higher. Generally coat hooks are for casual jackets & coats that are not knee length. Long coats just don’t work well on hooks above benches.

Where do you hang a coat rack?

Off the door frame so they sitting right about like that. Make mark with my pencil. Be sure my coat rack is sitting nice and even I'm going to use the level.

How far apart should hooks be on a coat rack?

If the wood is unfinished, consider staining it or painting it. Step 2: Mark the hook spacing using a pencil (space the hooks at least 8 to 12 inches apart to give garments or towels room to breath).

How wide should a coat rack be?

Width Guidelines



The common coat closet is typically designed according to how much room is available, or how much room you’re willing to give up. The general rule of thumb is to allow about 4 inches of width for an individual coat, or 48 inches of width for each person who uses the closet.

How do you anchor a coat rack?

Drill holes here with a drill fitted with a 1/4-inch bit and then tap drywall anchors into each. Pick up the coat rack, match the anchors with the mounting holes and drill 2-inch wood screws into each. Some coat racks can weigh as much as 20 pounds, so you want to make sure they are mounted securely.

How do you hang a coat rack on a door?

After the holes are marked I'll take a cordless drill with a small bit and drill pilot holes online mark. Next I'll take the two screws provided and fastened interact to the door.

How do you hang a coat rack on a brick wall?

If you need to hang heavy objects or ensure the object is secure on the wall, use screw-in anchor hooks. All you have to do is pre-drill holes into the mortar or brick, then screw in the anchor hook. You can also use anchors that stick to or clamp to the wall, but these are best for light objects only.

Should you drill into brick or mortar?

Mortar is easier to drill through because it’s a softer substance than brick and is also easier to patch or repair. Drilling into the mortar with a screw expansion plug or another fastener will cause the anchor’s force to push against the intact bricks instead of expanding the material.

How do you put a coat rack on a wall?

Area i'm using pre-primed 1×4 material so all i'm going to do is just touch up with some primer on this end so we don't see the grains of wood. I'm just using some primer here to touch up.