How do you use Intex pool test strips?

Asked by: Josef Warren

How do you read pool test strips?

Simply dip one test strip into pool or spa water at elbow’s depth and remove immediately. Shake once to remove excess water. Hold strip level and visually compare the strip to the color chart included on the bottle. Select the corresponding test result colors within 15 seconds of wetting.

How long do you leave test strip in pool?

Dip the test strip in the water for a couple of seconds, then wait 10 to 20 seconds for the strip to change colors. Compare the test strip to the color chart on the package. Be sure not to wait too long, this may cause the colors to keep changing and may give you an inaccurate reading.

How do you use chlorine test strips?

Off about 2 inches of test paper and dip the strip into a room-temperature chlorine solution remove. The test strip from the solution and blot it lightly with a paper towel compare.

How do you read the pH level in a pool?

But if you can see that the color matches eight so that means the ph is too high the range is about 7.2 to 7.6. That you want to be in so they need to add acid to the pool here to bring the ph level.

What color should a chlorine test strip be?

The pads will change color to indicate Total Chlorine (white pad on end) and Free Chlorine (yellow pad).

What do the colors on the pH strips mean?

Danger red represents the color of acids on alkacid indicators. Less acidic solutions are orange or yellow while neutral solutions are gray to green. Basic or alkaline solutions are blues and purples. Your indicator strips should come with a color chart to match shades to pH values.

Do pool test strips work in cold water?

As a general guideline, we recommend not testing pool/spa water samples that are <45°F (7.2°C). Another important reminder: Store reagents and test kits in a temperature range of 36°F–85°F (2.2°C–29°C).

How do you use a pool test kit?

Instructions

1. Take a Water Sample. …
2. Check the Vial Levels. …
3. Test for Free Chlorine and Residual Chlorine. …
4. Mix the Solution. …
5. Compare the Colors. …
6. Test the Pool’s pH Levels. …
7. Test for Acid Demand. …
8. Test for Total Alkalinity.

Are pool test strips accurate?

Are pool test strips accurate? Pool test strips provide accurate readings of your pool’s chemistry. In fact, pool test strips are a more reliable method of testing your pool water than a liquid test kit. Pool test strips eliminate the risk of human error.

What pH should my swimming pool be?

between 7 and 7.6

pH level in swimming pool water



Aim for a pH level of between 7 and 7.6. If the water pH is higher than 8, anyone who swims in the pool is at risk of skin rashes, while a pH of lower than 7 can sting swimmers’ eyes.

How do you know if your pool pH is low?

If Your pH is Too Low:

1. Irritated eyes and mucous membranes – the farther from the 7.4 to 7.6 range your pool’s pH is, the more noticeable the irritation will be.
2. It is always best to swim with goggles or a mask as pool water even at proper pH is not the same as your tears.

What should the pH and chlorine level be in a pool?

7.2–7.8

If used properly, free chlorine* can kill most germs within a few minutes. CDC recommends pH 7.2–7.8 and a free chlorine concentration of at least 1 ppm in pools and at least 3 ppm in hot tubs/spas.

Is pH same as chlorine?

However, at 6.0 your pool water would be extremely acidic and unsafe to swim in. On the flip side, if you pH is at 8.5 only 9% of your chlorine will be available to kill bacteria and algae. If pH is in the ideal range your chlorine will be about 50% effective.



How Does pH Effect Chlorine?

What happens if pH is too high in pool?

Water with a pH that’s too high also can cause skin rashes, cloudy water and scaling on pool equipment. Over time, scaling inside pipes can build up, restricting water flow and putting a strain on your pool circulation system that can lead to costly repairs.

Does too much chlorine raise pH?

High chlorine levels decrease the pH of your pool’s water, making it more acidic. The more acidic the water, the higher the likelihood of corrosion.

Will baking soda bring down chlorine?

How Does Baking Soda Work With Chlorine To Clean A Pool? Due to the versatile nature of chlorine, it can also be used to clean an acidic pool with a low PH level. But, to get the best out of chlorine in cleaning your pool, your pool water needs to be slightly alkaline.

Does baking soda lower pH in pool?

Baking soda, also known as sodium bicarbonate is naturally alkaline, with a pH of 8. When you add baking soda to your pool water, you will raise both the pH and the alkalinity, improving stability and clarity. Many commercial pool products for raising alkalinity utilize baking soda as their main active ingredient.

Will vinegar lower pH in pool?

Ordinary household vinegar could in theory be used to lower the pH of your pool. The pH of vinegar is about 2.5, which is quite acidic when compared to your pool water. Household vinegar is very weak though (when compared to a strong acid like muriatic acid), so you would need quite a bit to lower pH.

Does shocking pool lower pH?

Pool shock.



Shocking your pool is important, but if you’re using cal-hypo (calcium hypochlorite), it can raise your pool’s pH levels. Don’t stop shocking your pool, but do test all your chemistry levels consistently, especially after shocking.

Why is my pool pH always high?

The most common reason for a consistently high pH level in pools is the use of liquid chlorine or a saltwater system as the primary sanitizer. Sodium hydroxide is produced, which has a pH of around 13. New pool plaster or pebble finishes will also raise pH in pools for about a year after installation.

What does white vinegar do to pool water?

White Vinegar



It’s calcium buildup, and while it doesn’t damage your pool or the water, it doesn’t look great, either. Just like you run vinegar through your coffee pot to get rid of calcium buildup, white vinegar can wipe away this eyesore in your pool.

How do you clean the bottom of an Intex pool?

Use your Leaf Rake to scoop debris from an Intex pool.



With a little practice, you can scoop a dime from the floor with a Leaf Rake and Pole and can clean a pool floor very quickly, leaving only sand grains and silty dust for your pool brush. For clean Intex pools, a Leaf Rake, Brush and Pole could be all you need!

How long can water sit in pool without chlorine?

Without Chemicals



If a parent chooses not to use chemicals in the kiddie pool, the water must be drained after the children are done using it. This should occur within 24 hours. That means the parents must go through the hassle of filling the pool with fresh water each day.

Will baking soda clear a green pool?

Will baking soda clear a green pool? No. Baking soda will only raise your alkalinity and pH levels and this will not kill algae.

Can I use household bleach in my pool?

Household bleach, Clorox and liquid chlorine can all be used to sanitize a pool. They are all types of chlorine. Household bleaches such as Clorox usually contain about 5-6% available chlorine, about half that of pool liquid chlorine. Household bleaches often have unwanted fragrances and colors.

How do I make my pool water crystal clear?

In theory, if you have a cloudy swimming pool, you can add chlorine to “shock it” and clear things up. Chlorine will get the job done. But, the amounts may vary and you may have to really pound the pool with chlorine to get the water totally clear.