How do you use Clorox pool and spa shock?
6 min read
Asked by: Rebecca Tanner
How do I use Clorox pool and spa?
And cloudy water. And increasing swimmer comfort chlorinating or sanitizing your pool water is the second step in the easy 1 2 3 pool care brand system chlorinating your water is needed to kill algae.
How long does it take for Clorox pool shock to work?
Swim-Ready in 15 Minutes
Fast dissolving formula works quickly so you can treat and swim in just 15 minutes.
How do you put shock in a Clorox pool?
Follow these steps for your granular pool shock application.
- Prep. Put on your personal protective equipment, including gloves and eye protection.
- Run Pump and Filter. Apply pool shock with your pump and filter running to aid with dispersion and dissolution. …
- Apply Shock.
How do you apply pool shock treatment?
How do I shock my pool?
- Check that the pH levels in your pool are balanced.
- Prepare shock ahead of time in a 5-gallon bucket of pool water and stir.
- Ensure the pool pump is running. Pour the mixture from the bucket into the water around the edges of the pool.
- Let the pump run for about 6 hours or more and test the water.
How long should you run filter after shocking pool?
Run the filtration system
While shocking your pool will help kill any germs any algae, it won’t actually get rid of them; for that, you need your filter. So be sure to run your pool filter for at least 24 hours.
How often do I add shock to my pool?
about once a week
How Often Should I Shock My Pool? Shocking your pool regularly will help to keep the water clean and free of contaminants. You should aim to shock your pool about once a week, with the additional shock after heavy use. Some tell-tale signs that your pool needs to be shocked are cloudy, foamy, green, or odourous water.
What happens if you go in a pool that was just shocked?
BUT, if you have to shock your pool during the day in broad daylight, you can still swim after adding shock. It’s recommended that you wait one hour after adding shock with the filter running, and then test the water to confirm the pH and chlorine are in the proper range before letting anyone enter the pool.
Can you swim in pool after shock?
After Shocking Your Pool
It is safe to swim once your chlorine levels are around 5 ppm or after 24 hours. It is always best to test first!
What happens if you put too much shock in a pool?
Although, if you overdo the shock treatment, you risk getting green hair from chlorine due to the excess chlorine oxidizing the copper in the water. You can execute a shock treatment with a few different types of pool shock, just be mindful of how much you’re using.
Where do I put shock in my pool?
So let's pour the shock inside the pool. So that's it all you want to do is you want to pre-dissolve each bag in a bucket of water that means water first then put in the shock mix it up with a stick.
How much shock do I need for a spa?
How much Spa Shock should I use? For the Initial Treatment use 30g per 1,000 Litres of Spa water. For Maintenance Treatment: 15g per 1,000 Litres of Spa water every week. Follow the directions on your specific shock treatment labels.
How do you shock a spa?
Or just do a quick google. Search step number six shock it carefully add the shock to your hot tub using the method prescribed by the shocks. Manufacturer.
How long after shocking a hot tub can you use it?
After NON-CHLORINE shock wait 10-15 minutes before entering. After chlorine shock it can take up to 24 hours to clear. Therefore it is recommended to use non-chlorine shock. It is always recommended to test with a PH strip again before entering.
What happens if you put too much shock in a hot tub?
You only need a small amount of chlorine to successfully sanitize your spa, so it’s possible to overdo it if you’re not careful. Too much chlorine can damage your hot tub and irritate your skin, eyes and lungs. Thankfully, reducing the chlorine levels in your hot tub is very easy to do.
Can I add shock and chlorine at the same time?
While shocking and adding algaecide is effective in getting rid of algae, it should not be done together. This is because when you mix chlorine and algaecide together, it renders both of them useless. Hence, you should first shock the pool and wait for the chlorine levels to fall below 5 PPM.
Do I add chlorine or shock first?
Low chlorine levels often cause green or hazy water, so if your water looks a little cloudy and you haven’t shocked in a while, adding shock is the first step. It is always best to shock the pool in the evening, when the sun if off the water.
What order do I add chemicals to my pool?
First can help bring your ph. Into range if you need to raise your alkalinity. You can use an alkalinity increaser or baking soda. If you need to lower your alkalinity.
How long after I shock the pool can I add chlorine?
You should wait one hour per pound of shock product added, and then test the water to confirm the pH and chlorine are in the proper range before letting anyone enter the pool. As a reminder, you want your pH to be between 7.2 and 7.8ppm and your free available chlorine to be 1-4ppm for safe swimming.
Should I run pool pump after shocking?
Running your pool filter and pump after shocking is an essential step in keeping your pool looking great. The pump and filter need to be run for two reasons: Circulate and distribute the pool shock. Clean and filter the pool’s water.
How long should pump run after shock?
With non-chlorine shock, 15 minutes is sufficient with the pump running. With using a chlorine shock, it depends on how, and what, you were “shocking” for. A maintenance dose per say, one would only need to wait approximately 4 hours with the pump running.
Is it OK to run pool pump 24 hours a day?
A Rule of Thumb
Generally running your pool pump for 12-hours a day is a good option. This is based on the assumption that your average pool pump has a turnover rate of about 8 to 12-hours. That means that the total volume of your pool water will filter through your system 2 to 3 times per 24-hour period.
Is it better to run a pool pump at night or day?
The best time to run your pool pump is during the warmest hour of the day; however, keep in mind that this means you will have higher energy consumption, which may lead to an increase in your electric bill. If you want to save on your energy costs, you can run your pool pump at night to avoid peak hours.
Can I shock my pool during the day?
Best Time to Shock Your Pool
The best time of day to shock pool is when the sun is down. So, experts recommend shocking your pool in the evening or at night, to make sure it does its job. Shocking during the day can be ineffective as UV rays from direct sunlight significantly reduce free chlorine levels.
