How do you turn off your gas supply?

Asked by: John Twiggs

Locate your main gas service shutoff valve. It’s usually the first fitting on the natural gas supply pipe coming out of the ground next to the meter. With a wrench, turn the lever in either direction until it is crosswise to the pipe. Once the gas is turned off, leave it off.

How do I turn the gas off in my house UK?

Go to your meter. Locate the gas safety shut-off valve at your gas meter and turn it to the ‘off’ position. It is off when the lever is at a right angle to the pipe. If the gas safety shut-off valve is hard to reach or will not operate, contact Gas Networks Ireland on 1800 464 464.

Where is the gas shut off valve located?

Your main shut off valve is located just before the gas meter. This is called your “street side valve”. On the inside of your house, where the pipe enters your house, you can find your “house side valve.” This ball valve is attached to a black iron pipe.

How do I turn off my gas appliance?

All appliances typically have a gas shutoff valve located on the appliance itself. In the event you need to turn the gas off simply turn the handle 90 degrees.

How do you tell if gas supply is on or off?

When the long side of the nub or handle is parallel to the incoming gas line, it’s open and the gas is flowing. When it’s turned a quarter turn, perpendicular to the incoming pipe, it’s closed.

Can I turn my gas back on myself?

Once the valve is turned off, do not turn it back on by yourself. It must be turned on by a gas company technician. The gas company will likely perform a pressure test on the system and relight all pilot lights in the house as part of turning the gas back on.

How do I turn on my gas supply meter?

Hold the ok button to turn the meter. On press the ok button until you get to a screen that says armed enable press and hold the ok button the screen should appear saying enabled.

What does a gas valve look like?

Main Gas Shutoff Valves



The valve will usually look like a small rectangle, and you’ll need a special wrench to turn it. When it’s open, the long side is parallel to the incoming gas pipe. To stop the flow of gas, close the valve by turning it perpendicular to the incoming line.

What color are gas shut off valves?

While a gas valve handle color is often yellow or red you will also find gas-rated shutoffs with valve handles in other colors such as green or blue. Plumbers don’t rely on the gas valve handle color.

How do I turn off the gas to my stove?

It's a red bell. There you see it. And that valve is on and that is your gas line well we what we would want for you to do is to reach back here and just shut it off by simply turning it.

Is it OK to unplug a gas stove?

You may have a problem if you unplugged the electricity from the gas stove. If you don’t have a safety valve that shuts off the gas when there is no electricity, you could still have a gas flow. Is that correct? If you have a gas stove that has a manual ignition, it is safe to unhook the electricity.

Why does my gas stove have a plug?

Electricity on a Gas Oven



The most important purpose of the electricity is to power a piezoelectric ignition system, which eliminates the need for a standing pilot, which wastes gas. The power also operates the light, timer and, if the unit has one, the auxiliary power receptacle.

Can you turn on a gas stove without electricity?

In the case of a power outage, you can light the surface burners on your electric ignition gas or dual fuel range or gas cooktop using a match. Hold a lighted match next to the burner, then turn the knob to the low position. Use extreme caution when lighting the burners this way.

Does a gas stove use electricity?

Gas stoves require a gas line hook-up to operate. They also use a little electricity, primarily for igniters, oven lights, and digital displays. Gas stoves have two ignition systems: one that uses a pilot light that always stays lit, and one that uses an electric spark system to ignite the burner.

Is it safe to light a gas stove with a lighter?

You can still manually light nearly every modern gas stove with a match or lighter, even if the igniter is broken. Matches are safer and will work better than typical cigarette lighters. Turn gas on medium.

Does a gas furnace use electricity?

A: A gas fired, forced air home furnace typically requires a small amount of electricity to ignite and operate in your home. Most gas heat furnaces use less than 600 watts of electricity, or less than half of a typical 15 amp electric circuit.

How do I turn off the power to my furnace?

First look for a power switch located on or near your furnace. The location of the switch may vary. So be sure to check the sides rear.

How do you turn on a gas furnace without electricity?

And plugged into my small portable honda generator. This allowed me to flip the switch onto the extension cord side. And run the furnace from my 2000 watt honda generator which ran it just.

How do you turn on a gas furnace?

Procedures for the majority of natural gas standing pilot furnaces. Turn the furnace power switch. Off carefully remove the furnace. Door look for a pilot flame. If. There is no pilot flame.

Is it OK to turn off furnace?

It’s a good idea to turn off your furnace during hot months. If left on, it will continue to consume energy. The furnace contains some electrical components like sensors that can needlessly draw power throughout the summer. If your furnace has a pilot light, it will use up unnecessary gas during summer when left on.

Where is the on/off switch on a furnace?

It’s usually mounted on the side of the furnace or a wall nearby. Among other benefits, this switch allows you or your repair technician to shut off the electricity to the furnace without having to go to the main service panel to switch off the circuit breaker.