How do you change a drive belt on a club car?

Asked by: Mark Bryant

How do you change a belt on a Club Car golf cart?

The drive belt is plainly visible. Loosen the drive belt tension bolt, with the open end wrench, on the front pulley. Slide the old drive belt off the front drive clutch pulley, and then the rear clutch pulley. Slip the new belt around the golf cart’s clutch pulley, and then stretch it out over the front pulley.

How do you put a drive belt on a golf cart?

And just rolling it right over. It's that simple that was a little twisting a little tugging. That will come right on. Now. We do this lift it from around the clutch.

How do you change the drive belt on a gas Club Car DS?

You have to loosen all the bolts up the two up front which are 9/16 and loosen the adjustment bolt. Here which is a half-inch. So let's get these things loosened. Up.

How tight should a golf cart drive belt be?

The drive belt should not be too tight. If it’s too tight it can risk wearing off faster and it’s also harder to shift gears. To check if your drive belt is set just right make sure your golf cart is turned off then check the drive belt by pressing it down between the two clutches with your finger.

How do I know if my golf cart belt is bad?

Down below and you don't want to press the moderate pressure on that belt you're gonna want to see about 3/16 to 1/4 inch of deflection. There no more than that that'll be your proper.

What is a Club Car DS model?

Club Car DS



Club Car made body changes in 1981 and introduced the “DS” model, and this model quickly became the flagship cart of the golf cart industry. The Club Car DS front and rear body panels were constructed of plastic and fiberglass.

How do you measure golf cart belts?

Cover. Now the first measurement we're going to take on this is we're going to measure from the centerline of the crankshaft. To the centerline of the jack shaft.

Can you adjust a golf cart clutch?

If you are unsure about removing the drive belt or the clutch, then you can adjust it. Just take out the belt and wound it again with the secondary clutch according to the requirements, and your problem should be fixed.

How do you read a club car serial number?

The letters or letter at the beginning of the serial number (1) indicate the vehicle model, could be one or two letters. The following four digits (2) indicate the model year and production week during which the vehicle was built.

How can I speed up my Club Car golf cart?

If you turn it that way to the right or what appears to be counterclockwise. It slows it down. And if you turn it that way or clockwise it speeds things up. Very.

How do I stop my golf cart belt from squeaking?

Your belt may also be wearing down and even fraying which is a problem that can cause the belt to both squeak and whine as it runs. Replace any frayed belts right away, before they break, to avoid damaging your engine, and lubricate or replace any pulleys which continue to squeak on your cart.

How do I know if my pulley is squeaking or belt?

All you have to do is look at each pulley. And you just want to see if the belt is riding straight on the pulley. Or if it's moving side-to-side. You could also watch the pulley.

How do I lubricate my golf cart?

When you go to put grease in. You can use any kind of multi-purpose grease nothing fancy.