How do you bale hay by hand?

Asked by: Kelley Davila

What is the best way to bale hay?

Set the hooks in the stack. And away you go what these guys do is they load it on the flatbed trailer and then haul it to the shed. And unload it again with the same attachment on the skid loader.

How do you harvest hay by hand?

The proper method cutting hay by hand: stand with your legs apart and knees slightly bent. Three ropes tied around the width and a fourth wrapped lengthwise hold together each 70- to 90-pound bate of sun-dried hay. Swing your scythe and torso from right to left, concentrating on a smooth, whole-body pivot.
1 мая 1979

How do you make a homemade hay baler?

So how it works is you put the hay in plunge it down or hey plunge it down so it gets really packed. And then you hold it down really good. Now down in the bottom. String at the bottom of the Bale.

How does a manual hay baler work?

The grass is cut and rolled up inside the baler using either belts or a fixed roller, or a combination of the two. As soon as the bale reaches its predetermined size, the machinery automatically wraps netting or twine around the bale to maintain the shape.

How do you move hay bales without a tractor?

I'm simply going to use is this post hole digger tamping bar bot when we did all our fence. And gold sledge hammer.

What time of day should you bale hay?

As a rule of thumb, wait to rake hay until after the dew has dried and the sun nears its peak, or around 11:00 am. If possible, let the raked hay sit for an hour or two before baling to allow more drying time. Haymakers have several types of rakes available.

How do you pick up hay without a baler?

A scythe can be used to cut the hay while a hay fork can be used to pick up the hay after it has dried.

How do you store hay without a bailer?

You can store loose hay in a dry place; it won’t lose any nutritional value if it isn’t baled. The major drawback to storing it loose, as I said, is that it takes up a lot more space. Baling hay compresses it so it requires less space, and bales can be stacked more efficiently too.

How do you gather hay?

When harvesting hay, it is best to move slowly and deliberately for even cutting, as well as to minimize harm to any wildlife – snakes, birds, etc. – that may be hiding in the tall grasses. Once the hay is cut, it should be spread evenly to dry thoroughly before baling.

How do you make a hand bailer?

So basically the regular plans basically have four braces. Two on each side. So I had some left over 2i fours and so I'm actually inch and an eighth lap board or I'm sorry subflooring.

How did they bail hay in the old days?

Baling Hay



Hay was carried by hand to wagons that then took the hay to these early balers, where the machine pressed the hay into square bales. By the 1930s, hay baling equipment could be pulled by tractors and pick up the hay from the ground. This saved the farmer a lot of time and energy!

How much does hay baler cost?

Functional and small-field-ready used balers of all types can be had for around $1,500 to $6,000 — or much more depending on how recent the model year is. Be sure to look carefully over the spec sheet to be sure the hay baler will work safely with your tractor.

Is it cheaper to buy hay or make it?

In most environments where forage production is based on natural rainfall, you can almost always buy hay cheaper than you can produce it.

What equipment do you need to bale hay?

Hay Equipment



A compact tractor is the staple of every operation, but mowers, conditioners, hay rakes, balers, and sometimes hay tedders and bale wrappers are also needed. Pay close attention to make sure your tractor has enough engine horsepower to meet the horsepower requirement for each implement.