How do you backfill an above ground pool with a slope?
4 min read
Asked by: Jamie Brown
Fill in the gap between the pool walls and the top of the slope with contractor grade backfill dirt. Do not use gravel or sand, to avoid damaging the pool walls. Add dirt to reach the level of the top of the slope and give the backfill a few days to settle before topping it off.
Can I back fill around my above ground pool?
The pool must be filled prior to backfilling to prevent pool wall collapse and the water level in the pool must always be higher than ground level by at least 1 foot. Slurry is the best backfill material to use when completely burying an above-ground pool since it can better support its own weight.
What do you use to backfill around a pool?
Backfilling can be done with sand, dirt, or gravel. Consider the goals of the project and the budget when choosing a fill material. The backfill materials we normally use at Superior Groundcover are class 2 fill sand and pea stone. Pea stone is the best fill material because it’s self-compacting.
Can you put an above ground pool on a slant?
Above ground swimming pools are the perfect solution to installing a swimming pool in your sloped backyard. Whereas in-ground swimming pools require a flat and even surface, above ground pools can be designed into the slope of your backyard, making them the ideal answer for sloped backyards.
Can you backfill an Intex pool?
As long as the pool is filled with water, backfilling cannot harm the pool.
What are the steps to backfill a pool?
How to Backfill your Inground Swimming Pool
- Step 1: Swimming Pool Backfill Material. …
- Step 2: Arrange for the Heavy Equipment. …
- Step 3: Backfill – Tamp – Backfill – Tamp. …
- Step 4: Final Layer of Gravel. …
- Step 5: Soak Down the Backfill. …
- Step 6: One More Backfill Layer.
What do you put around the base of an above ground pool?
Using gravel or rock is one of the most popular ways when landscaping around your above ground pool. These rocks are readily available and suitable for all climates. They range in sizes, shapes and colors so you can always find the style you need to compliment the rest of your yard.
Should I put dirt around my above ground pool?
Do not attempt to install an above-ground pool below ground where all sides of the pool are surrounded by dirt. The weight of the soil when it becomes saturated with water will cause the walls to collapse. Professional excavation is recommended if more than a few inches of slope must be removed for the pool to fit.
Do you need drainage around an above ground pool?
Drainage is one the most important factors in the life expectancy of an above ground pool. Simply put, drainage is how well the area around your pool drains surface water away from the pool.
How do you level an uneven ground pool?
- STEP 1: Determine your location and remove any large rocks or debris. …
- STEP 2: Place 2x4s on the site and place a level on top. …
- STEP 3: Add or take away soil until the ground is level. …
- STEP 4: Repeat the process until the entire area is flat. …
- STEP 5: Rake any remaining rocks or debris and tamp the ground.
What do you backfill a fiberglass pool with?
Clean, crushed blue stone ¾-inch or smaller is the best type of gravel to use with a fiberglass pool because it has several distinct advantages over sand. First, its properties do not change when it becomes saturated with water, so it performs the same wet or dry.
What is Slurry Backfill?
Page 1. NATIVE SLURRY BACKFILL is a predictable and precise structural. backfill material that uses native on-‐site material mixed with. cement and water to create a performance backfill. Native Slurry Backfill (NSB) is a controlled low-‐strength material (CLSM) utilizing the on-‐site soils.
Can sand be used as fill?
Wet environments are where sand truly excels. Sand does not absorb water; it merely allows it to pass through. This makes sand ideal for applications in damp environments. Sand is often used for fill material in and around ponds, septic tanks, and other damp areas.
How do you keep sand from washing under your pool?
Place a cinder block inside the foundation area where each pool post will be resting and layer the inside of the boarded foundation with pea gravel, and then sand. Make sure the sand and cinder blocks are flushed with each other, and then rake another layer of pea gravel over the entire area.
Should I put a pad under my pool liner?
Yes! It is always a good idea to use padding under your liner as another layer to prevent roots, stones, or other debris from making a hole in your liner and causing a leak. There are many different kinds of padding on the market, to name a few there are: Gorilla Pad, Happy Bottom, and Foam Pad.
