How do you adjust a hunter Pro Spray?
3 min read
Asked by: Miguel Daly
How do you adjust Hunter sprinkler spray distance?
The tool counterclockwise. Towards the minus sign will decrease the arc. Once you've completed your adjustment. Turn on the zone and verify your work. You can now fine-tune.
How do I adjust the spray pattern?
Marked with an l or an o by twisting the spray head stem. Once the left point is set adjust the throw pattern from zero to 360 degrees by turning the collar at the bottom of the nozzle.
How do you adjust a hunter PGP spray nozzle?
The PGP Ultra is adjustable from 5-360 degrees.
- Insert the plastic key end of the Hunter wrench into the adjustment socket .
- While holding the nozzle turret at the right stop, turn the wrench clockwise. …
- Adjust to any arc between 40° and 360°.
How do you adjust the distance on a sprinkler head?
Using a small screwdriver adjust the spray head's throw distance by turning the center screw to reduce the throw distance by up to 25.
How do you adjust the radius on a sprinkler head?
To adjust the throw radius simply insert a fine-tip flat-head screwdriver into the metal screw (located at the center of the head). Rotate clockwise to decrease the radius, and counter-clockwise to increase the radius. 1. To adjust the arc simply twist the center collar (adjustable from 0 to 360 degrees).
How do you adjust Hunter PGP throw distance?
TO ADJUST RADIUS (DISTANCE OF THROW):
Turn clockwise (into the stream of water) to decrease the radius, or counterclockwise to increase the radius. Radius can be reduced up to 25%. Caution: Turning the adjustment key clockwise more than five full turns may result in a lost radius adjustment screw.
How do I adjust my oscillating sprinkler?
Set the spray pattern adjustment tabs to the desired position and adjusts the spray arm as needed. With a tab spread as far apart as they can be your sprinkler will cover its maximum.
What is a low angle nozzle?
A low angle nozzle is intended to spray water under low overhanging branches, or to keep the spray down close to the ground in windy areas. The reduced radius was not a primary goal of the low angle nozzle, it’s just a natural result of a low trajectory.
How do I know what size sprinkler nozzle to get?
Take the sprinkler head watering DIAMETER and multiply it by 0.6 to get the absolute maximum distance that should ever occur between any two adjacent sprinklers. (Remember most manufacturer’s give you the radius of the sprinkler, you need to multiply by 2 to get the diameter.)
Where are low angle sprinkler heads used?
This Sime K1-Teso Low-Angle Sprinkler is a low angle 8-degree trajectory typically used in applications where it is necessary to mount the sprinkler high on stand pipes or in orchard applications for irrigating under the canopy on mature trees.
