How do I find my Pfister model number?
7 min read
Asked by: Destiny Francis
If you still have your packaging or instruction manual, the product model number (usually an 8 digit code, i.e. F-529-7AYY) is displayed on the product package and on the instruction manual right below the product name. If you don’t know your model number, we have an easy-to-use filter feature to help narrow it down.
Where is the model number on a faucet?
Identifying Your Faucet Model
- The model number is printed on a tag that is attached to the cold water supply line of the faucet.
- The supply line is located below the sink, countertop, bath rim, or behind the bowl of a bidet.
- The model number, or part number, is typically preceded by “P/N.”
How do I identify my faucet brand and model?
Another quick tip is to look underneath the sink because sometimes you might be able to find a label that's attached to a supply line that will tell you the manufacturer.
How do I change the cartridge in my Price Pfister kitchen faucet?
Counterclockwise. Once the retainer note has been removed pull out the cartridge and install the new replacement cartridge please ensure that the tab is aligned in the back of the faucet.
How do you replace a Price Pfister bathroom faucet cartridge?
Insert the new cartridge into the body and rotate gently to ensure it's properly seated reapply the retainer nut and then tighten with your pliers.
How do I identify my bathroom faucet brand?
If you can’t find an identifying model number or manufacturer’s name on the faucet itself, you can identify the manufacturer if you remove the handle and the faucet stem and count the number of splines on its broach and measure the length of the stem. Chicago faucets for example, use a square broach without teeth.
How do I identify my faucet manufacturer?
To determine a faucet brand, look on the faucet for a logo or model number, which might be small and hidden around the curves of the faucet or handles. Try cleaning the faucet off first so it’s easier to spot the logo or model number.
How do I identify my shower faucet model?
Itself usually there's a mark on it some indication as to who the manufacturer is it could be either the name of the manufacturer. Or it could be a logo. If you can't see it easily.
What kind of faucet do I have?
The first and easiest way to find out the brand of your kitchen faucet will be if you can locate the logo somewhere on it. The logo might be large and obvious, or it might be small and unobtrusive. If you can’t see an obvious one, try cleaning it first. If it is slightly dirty, the logo might be hidden.
How do you measure a faucet stem?
If there is a square broach, measure the diameter of the square broach (flat end to flat end, not corner to corner). If the end of the stem is threaded, measure the thread pitch with a thread gauge. Record this measurement.
How do I fix a leaky Price Pfister faucet?
When you unscrew look under your sink for two small valves turn the valves clockwise to shut off make sure they're both often not leaking turn on the faucet your fixing.
How do I remove an old Price Pfister bathroom faucet?
Removing Price Pfister Faucet Cartridges
Some Price Pfister bathroom faucet handles are very easy to remove. Here’s how: Simply twist the base of the hot or cold handle counterclockwise and lift it to reveal the cartridge. If the base feels stuck, you can get some leverage with a pair of tongue-and-groove pliers.
How do I fix a leaky Price Pfister tub faucet?
One way with putting a whole brand new cartridge stem in there this is the whole price Pfister one right here it's the whole unit.
How do you stop a bathroom sink faucet from leaking?
To fix most bathroom faucet leaks turn off both water supply shut off valves beneath the sink and drain and the remaining water from the faucet.
How do you fix a leaky bathroom faucet single handle?
Remove the screw and lift off the handle. This is the adjusting ring tighten. The adjusting ring with a pair of needle nose pliers. The tightening will compress the parts inside the faucet.
How do I remove a Price Pfister tub spout?
Hold the tuff spout firmly with one hand while the other hand used the screwdriver to turn it counterclockwise slowly to loosen once it's loosened use both hand and slowly unscrew it from the pipe.
How do you remove a tub spout without set screws?
- Feel under the spout near the wall for a hole. The set screw is hidden inside the hole. …
- Put a pipe wrench on the middle of the spout with the handle pointing to the left. …
- Turn the bathtub faucet spout counterclockwise with the pipe wrench until you can twist the spout by hand.
- Choose the Right Shower Valves. First, you’ll want to consider the shower valves, which is the plumbing part that controls the water flow of the shower tap. …
- Pick the Configuration and Type. …
- Check the Water Pressure. …
- Consider Accessories. …
- Find Something in Your Budget.
- Shut off the supply of water to your shower.
- Seal your drain with tape so that small screws or other vital parts are not lost down the drainpipe.
- Tighten the screws behind the faceplate of the diverter valve. …
- Disassemble the shower diverter. …
- Change the diverter.
Why is my bathtub spout leaking?
A cracked or worn washer in the stem is a common source of a dripping bathtub faucet. Each time the water is turned on the washer is pushed against the valve. This repeated friction over time causes the washer to wear out. The tub faucet stem or cartridge itself may be the cause of the leak.
How do you replace a tub diverter spout?
So first we're going to just try to spin this guy off. And it's spinning pretty easy we've got a set screw under here. But it looks like this will probably just spin.
Can a shower diverter be repaired?
Once you’ve determined that your shower diverter is broken, don’t delay in repairing it. Though it might be an easy task to put off, a broken shower diverter wastes water and creates a poor shower experience. Repairing a shower diverter is a home improvement project that you can complete in just one day.
How much would a plumber charge to replace a shower valve?
Labor cost for plumber to replace shower valve
Plumbers charge $100 to $300 for labor alone to replace a shower valve or $225 to $575 for the valve with installation. Replacing a shower valve takes 1.5 to 3 hours on average, depending on type and accessibility. Replacing a shower cartridge takes 30 minutes to 2 hours.
Do I need to turn the water off to change a shower diverter?
If you’re only working on the diverter, you don’t need to turn off the water supply to the faucet. While working, place a cloth over the tub drain to prevent any dropped screws from going down the drain. Some showers use a diverter built into the tub spout activated by lifting a button on the spout.
Can you change a bathtub faucet without turning the water off?
If you are really just replacing the handle – which is really items 1-4 (and sometimes 5-6 or sometimes 5-6 don’t exist) – then no you do not need to turn off the water.
How do I know which shower valve to buy?
How to Choose the Perfect Shower Faucet (5 Expert Tips)
How do you fix a shower diverter valve?
Repairing the Shower Diverter
How do I know if my shower diverter valve is bad?
First, if the valve is engaged but water continues to come out of the tub spout only, the gate is severely damaged or has fallen out completely. Second, if the valve is engaged but the showerhead experiences low water pressure and water continues to drip from the spout, the gasket has failed or is starting to fail.
How do you replace a shower diverter cartridge?
Hold the handle turn counterclockwise okay now there's a cover plate right here with two additional screws. And once we loosen those the plate should come. Off.
