How do I disconnect a Price Pfister Quick Connect?

Asked by: Caleb Amabile

How do I remove Pfister from Quick Connect?

You push up until the gap between the bronze piece and the plastic piece goes away once that gap goes away grab ahold of the plastic piece. And then pull down.

How do I remove quick connect tap?

Turn on the faucet to release water pressure in the faucet. Push the quick connect up to compress it and keep holding it or the hose while doing this. Put your fingers on the very top of the white quick connect adapter while maintaining the hose upward. Pull the quick connect down and release the hose at the same time.

How do you disconnect a quick connect hose?

We press in both the hose and the collar. We hold the collar and pull to remove the hose. If we need to reinstall this hose.

How do I remove a Pfister sprayer hose?

Disconnect metal hose quick connect



Simultaneously pull the gray ring at the top of the brass tube down towards the floor – this relieves pressure on the collet holding the connector in place and allows you to remove it. Now pull the whole assembly down towards the floor and it will slide off.

How do I remove a Price Pfister faucet?

Modern Pfister faucets often come with quick-connect hoses for the pull-down spout, sprayer and handles for widespread models. There are actually four different types, but most work by pushing a tab while you push the connector together. This releases the connector, and you can simply pull it apart.

How do you disconnect a sink sprayer?

Then pull up on the old sprayer hose underneath loosen the mounting nut that connects the old sprayer to your sink. Then remove the assembly.

How do you remove a hose from a spray port?

This is an easy fix. Just squirt a little WD-40 into the quick connect, insert a small screwdriver into the center and tap the screw driver lightly with a hammer. This should free the valve and/or release any pressure and allow the valve to open.

How do you remove a faucet sprayer hose?

No matter what type of faucet you have you'll start by disconnecting the spray hose from the high-pressure hose underneath unthread the hose. Make sure you pull slowly.

How do I take apart a Price Pfister kitchen faucet?

It's simply unscrews when you unscrew it. You have to be careful. There is a gasket assembly inside and make sure you don't lose that down in your sink.

How do I remove a Pfister lock nut?

Superior tool has a faucet nut wrench. And you can use this remove the supply line and the nut that retains the faucet in place because when you're in a cabinet.

How do I remove a single handle Price Pfister kitchen faucet?

Remove the handle by pulling straight up. Unthread the dome cap so that you can access the retainer nut. If your faucet’s handle is really loose or closing by itself, let’s tighten the retainer ring using a crescent wrench and turning it clockwise until tight.