How do I clean my green Intex pool? - Project Sports
Nederlands | English | Deutsch | Türkçe | Tiếng Việt

Project Sports

Questions and answers about sports

How do I clean my green Intex pool?

6 min read

Asked by: Natasha Hudson

Light-green water indicates that algae are growing in your pool. Generally, when an aboveground pool, such as an Intex metal-framed pool, develops algae, the water is lacking in chlorine. You can kill and remove algae by using a chlorinated pool shock treatment and running the pool pump overnight.

What is the fastest way to clean a green above ground pool?

This so for my size pool i will add two of your clorox. Blue deep shock. And i will sprinkle it all over the pool i will do one side first and then i will do the other side.

How do I get my green pool water clear?

Shock Your Pool with Chlorine to Kill Algae



This is the main event in clearing a green pool—killing the algae. Pool shock contains a high level of chlorine that will kill the algae and sanitize the pool. For the best results, use a shock that contains at least 70% available chlorine (calcium hypochlorite).

How do I get rid of algae at the bottom of my Intex pool?

And it's good for 10 000 if you have a 10 000 gallon pool you should put 32 ounces in well this pool was around 5500 5400 so i put the whole 14 ounces in and it really like it's totally cleared up.

How do I get rid of green algae in my pool fast?

How Do I Get Rid of Algae In My Pool FAST?

  1. Vacuum Your Pool Manually. Automatic or robotic pool cleaners aren’t well suited for cleaning algae. …
  2. Brush Your Pool Walls and Floor. …
  3. Test and Balance the Water. …
  4. Shock Your Swimming Pool. …
  5. Filter Out The Pool Algae. …
  6. Test Your Pool Water Again. …
  7. Clean Your Pool Filter.


How do you clean a green pool without a pump?

4 Ways to Keep the Pool Clear Without the Pump

  1. 1) Remove Debris. It doesn’t take long for organic material and debris to begin collecting in the pool. …
  2. 2) Sanitize. Chlorine keeps a pool clean, clear, sanitized and safe. …
  3. 3) Prevent Algae. …
  4. 4) Agitate and Circulate.


How do you clean a green pool in 24 hours?

Follow the below steps to clear up your green pool in 24 hours:

  1. Test the pool water.
  2. Balance your chemicals and PH accordingly.
  3. Remove any debris.
  4. Shock the pool.
  5. Brush the pool.
  6. Vacuum the pool.
  7. Run the pump for continually for 24 hours.


How do you clean a green pool in one day?

Give it a really good circulation. So I move the pasty office timer. It's going to go for 24 hours here. So step one I brush to pull down. Step. Two I clean the filter.

Will chlorine clear up a green pool?

When there is not enough chlorine in your pool water, green algae—which can float freely or attach to the walls and floor of your pool—can grow. Thus, in many cases, the most efficient way to get rid of algae is by shocking your pool water with chlorine.

Will Shock clear a green pool?

Remember that shocking alone does not clear up a green or cloudy pool; that is what the filter is for. It doesn’t matter how much shock you put in the pool if you have a bad filter.

Why does my pool keep turning green?

Pool water turns green because of algae in the water. Algae can grow rapidly, particularly when it’s warm like Summer, which is why it can surprise you overnight. This generally comes down to an imbalance or lack of chlorine in the water.

How long does it take a green pool to clear up after being treated?

The fastest way to clean a green pool is by using pool chemicals and your pool filter. This process usually takes around 4-5 days but you will start noticing a major improvement after 24 hours.

Can you swim in pool with green algae?

But is it safe to swim in a pool with algae? Whether mild or severe, it isn’t recommended. Significant amounts of swimming pool algae welcome a breeding ground of harmful bacteria that feed on algae. These bacteria pose health risks to swimmers, most commonly resulting in a skin rash.

Why did my pool go green overnight?

The most common reason pool water turns green is due to algae growing in the water. Algae can grow rapidly, particularly in hot weather, which is why it can surprise you overnight during the warmer months. This generally comes down to an imbalance or lack of chlorine in the water.

Is it safe to swim in a slightly green pool?

While the green algae aren’t harmful, the bacteria that feed on the algae can cause issues. When you swim in green water, you expose yourself to algae that host bacteria. Swimming in green water could cause bacterial infections on your skin, and you could get sick if you ingest algae-filled pool water.

How do I make my pool water blue?

How do I turn my green pool blue?

  1. Shock the pool with chlorine every day until all the green is gone (possibly 3 to 4 days).
  2. Run the filter 24 hours a day and backwash every day until the green and then cloudiness is gone (usually up to 7 days, sometimes as long as 2 weeks depending on the filter).

How many bags of shock do I need for a green pool?

You will need to quadruple shock your pool by added 4 pounds of shock to every 10,000 gallons of water.

Will baking soda clear up cloudy pool?

Baking soda can work wonders in a pool. Baking soda can: Help to clear cloudy water and restore the sparkle. Spot-treat algae.

Does vodka clean a pool?

The short answer is (you may have guessed it): no. It’s not the best idea to clean your pool with vodka. Michael Dean, Co-Founder at Pool Research (opens in new tab), a site that provides expert advice on all things related to pools, spends a lot of time advising people on how to clean their pools.

Can you use alcohol to clean a pool?

Also called isopropyl alcohol, it’s good for removing sticky gunk and shining stainless steel surfaces. Be sure to dilute it with water first, making a mixture that’s 50% to 70% alcohol. Bonus Tip: It’s a good idea to keep rubbing alcohol on hand to clean small wounds, but it’s especially important if you have a pool.

How do you clean a pool filter with muriatic acid?

Open The Filter Tank (Releasing the Pressure First) and Take Out The Cartridge Filter(s) Fill Up a Trash Can with a 20:1 Ratio of Muriatic Acid and Water. Soak the Cartridges in the Muriatic Acid Solution for 1 Hour. Rinse Cartridges with a Garden Hose and Reinstall.