Can a bobcat remove stumps? - Project Sports
Nederlands | English | Deutsch | Türkçe | Tiếng Việt

Project Sports

Questions and answers about sports

Can a bobcat remove stumps?

7 min read

Asked by: Jennifer Meyer

As a reliable piece of equipment, a skid steer can in fact remove a stump from your job site – it just takes a little more work to get the job done. Let’s take a closer look at what is involved in skid steer stump removal, so you can tackle this problem in no time.

What is the best equipment to remove stumps?

Both John Deere utility tractors and compact utility tractors have powerful backhoe attachments that you can add-on to remove large tree stumps. The backhoe can’t do it all for you — you’ll still need a shovel, an ax, and a chainsaw — but you’ll save hours digging around that stump if you let the tractor do the work.

What is the easiest way to get rid of stumps?

Dig the Tree Stump Out of the Ground

  1. Dig around the stump, exposing as many roots as possible.
  2. Use a chainsaw, hatchet, or handsaw to cut the larger roots. …
  3. Once you’ve cut all of the roots around the stump, lift and remove the stump from the ground.
  4. Fill the hole with dirt and cover it with topsoil or mulch.


Can you pull stumps out with a truck?

Best case, the stump comes out without a fight. Worst case, you blow your transmission and still have a stump in the ground. Let us be clear: it is not good for a truck to pull at a stump like that. If you use a chain, it could snap and hit someone or something.

How do you get rid of fallen stumps?

Use a pruning saw or reciprocating saw to cut through larger tree roots. Chop through hard-to-reach roots with an iron digging bar. After cutting all the roots, push over the stump, then roll it out of the hole.

Can a skid steer dig up stumps?

As a reliable piece of equipment, a skid steer can in fact remove a stump from your job site – it just takes a little more work to get the job done.

What size excavator Do I need to remove a tree stump?

As I mentioned before, a small or mini-excavator should be more than enough while removing small to medium-sized tree stumps. The usual rule of thumb is that a stump with a root ball size of 50-60” or a stump diameter of 28” can be removed using a mini excavator.

How does Epsom salt remove stumps?

Soaking Method

  1. Mix together Epsom salts and water to a ratio of one part Epsom salts, two parts water. …
  2. Drench the stump and any exposed roots with the mixture.
  3. Cover the stump with a tarp, and repeat soaking every week until the stump appears visibly dried out.


How long does a buried stump take to rot?

In most cases, allow four to five years for the root system to decay before you plant another tree on the ground that was beneath the foliage of the old tree.

How do you rot a tree stump fast?

Potassium nitrate is an effective chemical for removing a tree stump close to your house. It is often explicitly sold as a wood remover. Potassium nitrate stimulates wood decomposition and kills it completely. Its use will result in the fastest rotting process of the stump.

Is stump grinding difficult?

We aren’t saying that all DIY efforts for stump grinding are ineffective, but it’s not a simple operation. It also is a potentially dangerous activity. Sometimes, it’s best to let pros do this type of work. They have daily experience with doing things you may try to do a couple times in your lifetime.

What do you do with a tree stump in the front yard?

Step 1 hide your tree stump with decorative. And easy to grow ground cover that features attractive foliage and flowers in the spring.

How do you remove a large tree stump by hand?

And then pull it out with like a truck or something. But I want to do this totally by hand if it's just gonna be grass here you don't really have to get rid of the entire stump. And root system.

How do you remove a tree stump without heavy equipment?

Side I have a wedge just in case but I want to cut on the opposite side and work my way this way.

How do you remove a stump without equipment?

How to Remove a Tree Stump Manually

  1. Dig Down Around the Stump. Dig around the stump with the mattock’s broad end. …
  2. Sever Visible Roots. Use the other end of the mattock to start chopping your way through the tree roots. …
  3. Expose the Tap Root. …
  4. Sever the Tap Root. …
  5. Extract the Stump.


How quickly does stump remover work?

6 to 8 weeks

In the case of newly cut stumps, a stump removal herbicide that travels to the roots is necessary to stop resprouting. Depending on the product, results may appear within 6 to 8 weeks. The stump itself, however, may not decompose for another few months.

Does stump remover work?

Effectiveness. While chemical stump removers do effectively hasten the degradation process of a stump, they are not a short-term method of stump removal. Often the process of decay can take several years. The length of time it takes for the stump to fully decay usually depends on the condition and size of the stump.

Can you use a chainsaw to remove a stump?

You can remove a tree stump with just a chainsaw by simply digging around the stump, cutting it as low as possible. Then cut crisscross slices into the stump 4-6 inches below ground level. Keep in mind to avoid the contact of the chainsaw with the ground.

How does Epsom salt remove stumps?

Soaking Method

  1. Mix together Epsom salts and water to a ratio of one part Epsom salts, two parts water. …
  2. Drench the stump and any exposed roots with the mixture.
  3. Cover the stump with a tarp, and repeat soaking every week until the stump appears visibly dried out.


How do you remove a stump without a stump grinder?

One of the most effective manual methods of removing most tree stumps involves using a chainsaw, sledge hammer and wedges. Steel wood-splitting wedges are best but wooden wedges will work.

Can I grind a stump yourself?

The engine throttle should be in the slow. Position. Start the spinning cutting wheel. Lower the wheel a couple inches into the stump and gently nim it away with side by side movements.

Can you remove a tree stump by yourself?

Step 1: Clear dirt, debris and rocks away from the tree stump using your mattock or shovel. Step 2: Using your chainsaw, cut as much of the stump as possible. Ground-level is ideal. Step 3: Place the stump grinder wheel a few inches above the stump and turn it on.

Is it difficult to use a stump grinder?

This is a loud, powerful machine with a sophisticated hydraulic system, but it’s surprisingly simple to operate. But, before you crank up the motor and start grinding away, it’s important to prep the area for the stumpectomy.

Is it better to grind a stump or remove it?

Grinding is much more efficient than stump removal, however, it does leave the tree’s roots behind. If the stump is large, the chip pile produced can also be quite large, but the chips can be used as mulch for other plants in your landscape.

How deep should you grind a stump?

We generally grind four to six inches below grade (ground level). If deeper grinding is needed, it can be requested, although the price of stump grinding may increase. The depth to which a stump can be ground is subject to some limitations, however.

How long does it take to grind a 24 inch stump?

How long will the stump grinding process take? For one stump, the process can take 15 minutes to 2 hours, depending on the size of the stump, the location, and more.

How many stumps can you grind in a day?

Once you get used to operating a stump grinder, it will take you about 15 minutes to fully grind a 15” inch. In about 6 hours, depending on the size of the stumps, you can grind anywhere between 15-20 stumps. With smaller stumps, this number can easily rise to 24-25.

How do you rot a tree stump fast?

Potassium nitrate is an effective chemical for removing a tree stump close to your house. It is often explicitly sold as a wood remover. Potassium nitrate stimulates wood decomposition and kills it completely. Its use will result in the fastest rotting process of the stump.

What do you do with wood chips after stump grinding?

When wondering what to do with stump grinding debris, the best answer is to make mulch. This is the most common and practical use for leftover stump grindings. Stump grindings make for excellent mulch. They help to insulate your soil, retain the soil’s moisture, and even make weed removal easier.