Are graphite pool cues any good?
6 min read
Asked by: Debbie Hopp
What is the best material for a pool cue?
rock maple wood
Customarily, a pool cue of exceptional quality is made from a straight-grained hard rock maple wood, especially the shaft. Today, many different types of woods are being utilized amongst cue makers, and continue to increase in popularity.
Can you break with a graphite pool cue?
Yeah, graphite or fiberglass sticks will shatter after a strong break. But you can get an exceptinally smooth stroke.
Are carbon fiber pool cues better than wood?
Compared to wood and other materials, a carbon fiber shaft can last a lot longer. You won’t have to worry about dents or scratches. It is also less prone to reacting to atmospheric changes, whereas a wooden shaft can shrink and expand due to temperature or humidity. A carbon fiber cue shaft is easy to maintain too.
How do you clean a graphite pool cue?
You would get a paper towel just scale in there seek. And get it get it wet now you don't wanna get it too wet you just want to get it damp.
How can you tell a quality pool cue?
5 Things To Consider when Buying A Pool Cue
- BUDGET – FIND THE RIGHT CUE WITHOUT BREAKING THE BANK. …
- SKILL LEVEL – CONSIDER HOW SERIOUS THE PLAYER IS. …
- PERFORMANCE – PICK A CUE THAT DOES WHAT YOU NEED IT TO. …
- STYLE – CHOOSE A LOOK THAT FITS THE PLAYER’S PERSONALITY. …
- WEIGHT/BALANCE – SELECT THE RIGHT WEIGHT AND BALANCE.
How much should you spend on a pool cue?
So to answer your question: the sky’s the limit, however, for someone just starting out a good price range is between $100-$150. Pool cues are made up of two main pieces: the butt and the shaft. As you might have guessed the base or larger end of the cue is the butt, and the tapered end is referred to as the shaft.
What is a graphite pool stick?
Graphite pool cues are among the sturdiest sticks available. The shafts are extremely dent and warp resistant while still offering a high level of playability. In addition, most graphite shafts are colored to match the butt of the cue.
How do you clean a carbon fiber shaft?
Than the the ones that are made for carbon fiber shafts. But all you have to do is just take it out. Watch paper towel just wipe it all the way. Down.
How do you straighten a two piece pool cue?
With the cue at a 60-degree angle to the floor, place the flat of one hand, palm down, directly on the bend. Press down on the cue, holding it still with your hand. The cue will bend easily into shape. Rotate the cue again and repeat, checking and adjusting until you have straightened the cue.
How do I keep my pool cue from warping?
There are some easy ways to prevent a pool cue from warping in the first place.
- Don’t lean your cue up against any surface, such as a wall or the pool table. …
- Don’t leave your cue next to any heat source, such as a radiator or fireplace.
- Don’t store it in extreme hot or cold—such as a basement or attic or hot car.
Why do pool sticks warp?
The two most common reasons are temperature change and side pressure. Never leave a cue in your car! Leaving a cue in your car during extreme temperatures, both hot and cold, will warp a cue in a matter of hours.
How can I tell if my pool cue is warped?
Hold the cue up at eye level and look down the cue from the butt. Hold the cue out and slightly downward, slowly turning the cue as you look down the cue from the butt to the tip. Some will tell you to “roll” your cue to check for warping, however this is not the most reliable way to check.
Do carbon fiber pool cues warp?
Unlike their wooden counter parts carbon fiber shafts won’t warp in the heat or cold. They also won’t get dinged up when you’ve gone temporarily insane after a bad shot or had a few to many at the pool hall. Low Maintenance is probably the most convenient benefit of a carbon fiber shaft.
How should I store my pool cue?
Hello I'm Brandon with select billiards and today I want to show you the correct way to put your pool cue away in your pool. Case. Alright. So the first thing I'm going to show you is your standard
How often should I scuff my cue tip?
every few games
Over time however, the tip will start to smoothen out and the chalk will have less and less to cling to. You’ll wind up having less chalk on your tip and more miscues. To combat this, we scuff the tip every few games.
What do you do with a new cue tip?
So what you can do is you can take the spikes. And you can poke it like this. And that allows it to hold chalk but it creates little tiny holes that the chalk gonna go to the holes.
How often should you clean your pool cue?
If you play and compete a lot, it is recommended to change the sole more or less every 5 months. The maintenance of the billiard cue is something very subjective that depends on the billiard player’s taste, the climatic conditions (humidity, temperature …) and the play material.
Should you wax a pool cue?
Keeping It Slick and Smooth:
Your shaft will keep the slick feel for several weeks of play. Cue Wax, like the Cue Doctor Wax, will also keep your shaft slick and shinny, sealing off the pores and protecting the wood.
Can pool cues be stored horizontally?
Storing a cue laying down, or leaning against a wall can cause warping due to the pressure by gravity being applied to one side of the cue or shaft. Storing the cue vertically minimizes the force that is being exerted laterally on the cue or shaft. Cases can provide additional protection and support.
How do I recondition my pool cue shaft?
Every type of sandpaper. I have starting at 100 going to 150 down to 220 where I'm at now. Then. I start with my sanding sponges. And I'll speed up the lathe.
How much does it cost to rewrap a pool cue?
Turn Down Shaft Diameter (Below 11.75mm) – Traditional maple shafts only. Refinish: No-Wrap Cues – Add $30 for stainless steel joints.
Brass Shaft Insert.
Butt Upgrade Options Upgrade pricing only available on new cue orders. | MSRP | |
---|---|---|
Finish Over Linen Wrap | + | $100 |
Text Engraving on Butt Plate | + | $30 |
How much does it cost to Retip a pool cue?
between $12 and $15 dollars
Most professionals charge between $12 and $15 dollars in labor for every pool cue that is repaired, so replacing the tips on your house cues or custom pool cues can save you a bundle when you do it yourself.