Nederlands | English | Deutsch

Project Sports

Questions and answers about sports

White graphite (hBN) a worthwhile chain lube?

6 min read

Asked by: Julie Payne

Which lubricant is best for cycle chain?

Best bike chain lubes

  • Smoove Lube. The Energizer Bunny of chain lube. …
  • Rock N Roll Gold. Workhorse all-rounder chain lube. …
  • Silca Super Secret Chain Lube. It’s like hot wax but in an easy to apply drip bottle. …
  • Green Oil Wet Lube. …
  • Finish Line Wet. …
  • CeramicSpeed UFO Drip Ceramic lube. …
  • Tru Tension All Weather. …
  • Molten Speedwax.

Can you use graphite to lube bike chain?

this is a great product, and if you’re happy with it you should stay with it. Probably the only thing wrong with graphite in grease or oil for bike chains is marketability. Folks don’t want to try stuff that’s already black when applied.

Can you use graphite spray on bike chain?

Quote from video: And with its graphite powder. And now we just want to melt some candle wax over it and the wax just helps the carbon seep into all the small small little nooks and crannies of the chain.

What’s the difference between wet chain lube and dry chain lube?

Wet lube goes on wet and stays wet, while dry lube goes on wet and leaves a clean, dry, waxy residue. Dry lubes don’t last as long and are best used in dry conditions. Wet lubes stay on significantly longer, even while riding in inclement conditions.

What chain lube do pro teams use?

But we do know that they’re exclusively using Morgan Blue lubes and cleaners. Plenty of pro teams swear by Morgan Blue.

Should you put WD-40 on a bike chain?

Can I use WD-40 to lube my bicycle chain? No. You should never use WD40 as chain lubricant since WD-40 is NOT a true lubricant. WD40 is primarily a solvent or rust dissolver.

Is graphite a good lubricant?

While the carbon atoms are strongly bonded together, the forces between each layer are weak. This allows them to easily “slide” over each other with minimal resistance. It’s this feature that gives graphite its slippery surface and makes it such a high-performing solid lubricant.

Is graphite better than wd40?

A: Although WD-40 is magic stuff, it is not the best choice to lubricate automotive door locks and linkages. Although it does a good job of cleaning and temporary lubricating, it goes away, so it makes a good first step. Graphite has long been a popular lube choice, but we like to use bike chain lube.

Is graphite better than grease?

The greatest benefit to using graphite (rather than oil) is that the graphite leaves no sticky residue that may later attract dust. This is because the lubricating properties of graphite lie in its weak covalent bonds that allow the layers of graphite to “slide” on top of one another with very little resistance.

What does graphite spray do?

It creates a quick drying film that provides long-lasting lubrication. It’s recommended as a general maintenance lubricant on gaskets, transfer belts and conveyor belts. Also for use for high temperature, low load, locks, rollers, wheels, gears, chains and hoists.

What happens when you mix graphite and oil?

Carbon is one of the reasons your used motor oil turns black, it is an oil impurity. Mix a tiny amount of graphite in with the oil and you just made dirty oil. Chunks of graphite will be interfering with the flow of the oil through the tiny fluid channel between the wheel and axle.

What is dry graphite lube used for?

CRC Dry Graphite Lube is ideal for use on transfer belts, gaskets, motors, conveyor belts, plant machinery and handling equipment, rubber moldings, high temperature, low load, or high rpm slides, rollers, wheels, gears, chains, and hoists.

How often should you lube your bike chain?

once every month

If you are a frequent rider, using your bike several times throughout the week, your bicycle will benefit from a regular cleaning and lubrication of the drive chain. Bicycle Tutor recommends cleaning and lubricating your bike’s drive chain at least once every month to maintain optimal performance and protection.

Is White Lithium Grease good for bike chains?

No, lithium grease or similar grease compounds are in general not suitable for bike chains. Bike chains need lubrication of inner surfaces between rollers. Chain lubes contain solvents to reduce viscosity enough to creep into these gaps. The solvent dissipates and leaves a high viscosity oil.

Can I use 3 in 1 oil on my bike chain?

I don’t recommend using either motor oil or 3in1 oil to lubricate the chain. Motor oil is too heavy and won’t fully penetrate the rollers, and 3in1 oil is vegetable based and will gum up the chain.

Is it OK to use silicone on bike chain?

Yes. It is not optimal for use on chains though. It washes away rather easily leaving your chain unprotected and un-lubricated. It would work in a pinch but a light oil or something specifically made for the application will work much better and last a lot longer.

Can we use coconut oil for cycle chain?

Apart from the wastage of oil while applying( as coconut oil would easily drip down from the chain), the oil would easily evaporate due to frictional heat (I assume it wouldn’t last for more than one ride). While coconut oil would be better than no lubricant, it would damage the chain and spoke if used too often.

How do I lubricate my bike chain?

Quote from video: The outside of the chain. Doesn't need to have any lubrication. The only benefit of a bit of oil on the outside is to help prevent it from from corroding.

Can I use engine oil as chain lube?

While it is possible to use engine oil as chain lube, it is not recommended. Motor oil has a high viscosity, which makes it difficult for the oil to penetrate the inner chain. In turn, the thickness of the oil can impact the drag force of your bike and cause the chain to prematurely stretch and wear.

What oil is most commonly used for lubricating chain drives?

light petroleum oil

The best lubricant for most applications is a light petroleum oil. High viscosity oil and grease are suitable only for slow drives exposed to weather conditions. Chain drives should be protected from dust, dirt and moisture.

What can you use in place of bar and chain oil?

The 6 Best Chainsaw Bar and Chain Oil Alternatives

  • Vegetable Oil. Vegetable oil is one of the safest alternatives available to oil your chainsaw. …
  • Canola Oil. …
  • Motor Oil. …
  • Hydraulic Fluid (Diluted) …
  • Drained Motor Oil (Diluted) …
  • Drained Hydraulic Fluids (Diluted)